This circuit has been created to design a decoder circuit that will operate in a module that would produce an audio surround sound.
Skema Rangkaian Audio Surround sound Decoder
The operation of the above circuits starts as the stereo sound signal transports surround sound information on the master volume part of the circuit. This will drive the Left channel Lch attached to Model TL072 IC1A and IC1b in which Right channel Rch is attached. The outputs on these operational amplifiers would serve as the input buffer to the following stages of the circuit. IC2C is responsible for summing up the signals from the left and right channels that will power the central loudspeaker output while IC2D is responsible for increasing the phase difference between left and right channels which is encoded in the two channels and will be fed to the rear loudspeakers. It is necessary to ensure that the negative terminals between the rear speaker is not earthed because they will simply function in parallel with the main speakers.
The output of IC2D will power regulated delay unit of audio to the rear loudspeakers. This would lead to the creation of proper sense of spacing in accordance to the size of the room. This will incorporate op-amp sound delay signal IC5 MN3004 which has 512 stages. Since IC4 MN3101 is a clocking signal, it provides timing to IC5 as it functions as an oscillator in the circuit. Variable capacitor C17 regulates the delay time in the circuit. The presence of filters in the circuit is for the purpose of preventing noise that will be produced during the process. These filters can be regulated to cut the frequencies above 8 KHz and under 100 Hz, to be able to drive the rear speaker. The rear loudspeaker is small in size because its input is encoded with a bandwidth of 100 Hz up to 8 KHz. The filters are built around the IC6A/B which is also an output buffer. A potentiometer is placed in every output to aid in the adjustment and regulation of loudspeakers and amplifiers. The supplied power in the circuit is 15 V and every output can drive a single power amplifier.
List Compoment
R1-2-7-8-12-13-18-19-20 : 47Kohm R3-4-5-6-21-22-34-35 : 10Kohm R9-10-11-14-15-16-17 : 15Kohm R23-24-25-33-36 : 100ohm R26-27-28-31-32 : 100Kohm R29-30 : 5.6Kohm C1-8 : 47uF/25V C2-7-9-14-23 : 47nF C3-6 : 1uF/100V C4-5-10 : 33pF C11-12-15 : 10uF/25V C13 : 82nF C16 : 18pF C17 : 100pF mini adjustable capacitor C18 : 2.2nF C19 : 4.7uF/25V C20 : 100nF C21 : 10nF C22 : 180pF C24 : 150nF RV1-RV2 : 2 X 10Kohm Log. pot. RV3-4 : 10K Log pot. D1 : 1N4148 IC1-6 : TL072 IC2-3 : TL074 IC4 : MN3101 IC5 : MN3004
This Audio Surround Decoder circuit from www.circuit-projects.com
Posted by , Published at 1:53 PM and have
